運送鋁板、鋁卷資料應留意哪些？
What should we pay attention to when transporting the information of aluminium sheet and coil?
鋁卷能夠進行整卷的包裝分成小卷來進行運送，較好襯紙芯或許鋁芯的防止鋁卷在運送的過程中變形，鋁板在裝車時要留意安穩性，防止鋁板磕碰等。
Aluminum roll can be packed into small rolls for transportation. It is better to prevent the deformation of the roll by lining paper core or aluminium core. Aluminum sheet should pay attention to its stability during loading and prevent the collision of aluminium sheet.
鋁板、鋁卷耐腐蝕，如果在運送過程中被淋雨的話，或許就導致了外表均勻腐蝕，影響運用過程中的外觀，所以在鋁板、鋁帶、壓花鋁板等在運送過程中一定要做到防潮防雨。
Aluminum sheets and coils are corrosion-resistant. If they are rained during transportation, they may cause uniform corrosion on the surface and affect the appearance of the application process. Therefore, moisture-proof and rain-proof must be achieved in the transportation process of aluminum sheets, aluminum strips and embossed aluminum sheets.
防腐蝕性液體不能夠和濕潤、油品、化工原料等資料進行混裝，防止發生部分或腐蝕，使鋁板或鋁材報廢。鋁板的硬度一般較低，所以在運送過程中也要做好防磕碰作業，尤其是鋁箔更容易發生碰傷，磕傷的情況，在裝卸貨、轉運的時候一定要做好防護作業，包含吊具應運用軟帶和旅伴接觸的地方應運用護角等，這樣才能保證貨品的安全抵達。
Anticorrosive liquids can not be mixed with wetting, oil, chemical raw materials and other information to prevent partial or corrosion, so that aluminum sheets or aluminum scrap. Aluminum plate hardness is generally low, so in the process of transportation also need to do a good job of anti-knock operation, especially aluminum foil is more likely to occur collision, knock injury situation, in loading, unloading, transshipment must do a good job of protection operations, including lifting gear should use soft belt and travel companion contact should use corner protection, so as to ensure the safe arrival of goods.

鋁板運送途中的丟失，不外乎以下幾點：
The loss of aluminium sheets in transit is nothing more than the following:
一，碰傷、進水氧化、劃傷。不合理的裝車是形成丟失的主要原因。鋁板裝車時，一定要把鋁板裝安穩固定好，不要放在其他貨品上面，要放在車廂較下面；
First, bruises, water oxidation, scratches. Unreasonable loading is the main cause of loss. Aluminum plate loading, must be installed in a stable fixed, do not put on other goods, should be placed at the bottom of the carriage;
第二，鋁板可層次堆放，但不要過高，不要超過3-4層為宜；
Secondly, the aluminium sheet can be stacked in layers, but not too high. It is advisable not to exceed 3-4 layers.
第三，車廂內其他貨品要進行加固，防止行車途中磕碰鋁板；較終，鋁板上面要加蓋防水布，防止因為雨、雪等天氣原因形成鋁板丟失。
Thirdly, other goods in the carriage should be reinforced to prevent bumping into the aluminium plate while driving; finally, the aluminium plate should be covered with waterproof cloth to prevent the loss of aluminium plate due to weather factors such as rain and snow.
以上信息是我們鋁板生產廠家整理發布希望對大家有所幫助我們的網站是：http://liyukeji.com!
The above information is our aluminium plate manufacturer's collation and publication hope to help you with our website is: http://liyukeji.com!