鋁板廣泛用于不需要高強度的產品。產品常用于招牌，廣告牌，建筑物外墻裝飾，客車車身，高層和工廠墻壁裝飾，廚房水槽，燈座，風扇葉片，電子零件，化學儀器，薄板加工零件，深沖或旋轉凹陷器皿，焊接零件，熱交換器，鐘表和銘牌，銘牌，廚具，裝飾品，反光器具等。
Aluminum plates are widely used in products that do not require high strength. Products are commonly used in signboards, billboards, building exterior wall decoration, bus body, high-rise and factory wall decoration, kitchen sink, lamp holder, fan blade, electronic parts, chemical instruments, sheet metal processing parts, deep drawing or rotating concave utensils, welding parts, heat exchangers, clocks and nameplates, nameplates, kitchenware, decorations, reflective utensils, etc.
看一下厚度?；y鋁板的厚度，強度和氧化膜厚度應符合國家標準：鋁板厚度≥1.2mm，抗拉強度≥157N/mm2，屈服強度≥108N/mm2，氧化膜厚度≥10微米。如果不符合標準，則為劣質鋁板。
Look at the thickness. The thickness, strength and oxide film thickness of excellent pattern aluminum plate shall comply with national standards: aluminum plate thickness ≥ 1.2mm, tensile strength ≥ 157n / mm2, yield strength ≥ 108n / mm2, oxide film thickness ≥ 10 microns. If it does not meet the standard, it is inferior aluminum plate.
以3003為主要原料加工。這種鋁板也稱為防銹鋁板。其強度略高于普通鋁合金花紋板。具有一定的防銹性能，但其硬度和耐蝕性不能達到5000系列花板。因此，該產品可用于不嚴格的防銹要求，例如卡車型號和冷庫地板。
It is processed with 3003 as the main raw material. This kind of aluminum plate is also called antirust aluminum plate. Its strength is slightly higher than that of ordinary aluminum alloy checkered plate. It has certain antirust performance, but its hardness and corrosion resistance can not reach 5000 series flower board. Therefore, the product can be used for less stringent rust prevention requirements, such as truck model and cold storage floor.
鋁板生產廠家它由5000系列鋁板（如5052或5083）制成，具有良好的牛奶腐蝕，硬度和防銹性。它通常用于特殊的地方，例如輪船和機艙燈。鋁板硬度高，具有一定的承載能力。
Aluminum plate manufacturer, which is made of 5000 series aluminum plates (such as 5052 or 5083), has good milk corrosion, hardness and rust resistance. It is usually used in special places, such as ships and engine room lights. Aluminum plate has high hardness and certain bearing capacity.
以1060鋁板為基材加工制成的鋁合金花紋板，可以適應普通環境，價格低廉。通常冷藏，地板，外包裝都使用這種圖案的鋁板。
The aluminum alloy checkered plate processed with 1060 Aluminum plate as the base material can adapt to the ordinary environment and has low price. Aluminum plates with this pattern are usually used for refrigeration, flooring and outer packaging.
鋁板生產廠家二看加工。常規大型工廠生產的帶圖案的鋁板由光潔的材料制成，圖案清晰整潔，鋁板平坦，表面無油漬，劃痕和褶皺等缺陷。小型工廠生產的帶圖案的鋁板使用廢鋁作為材料。表面暗淡無光，圖案不清晰不平整，板面不平整，性能達不到標準，質量差。
Aluminum plate manufacturers second look at processing. The patterned aluminum plate produced by conventional large factories is made of smooth materials, with clear and tidy patterns, flat aluminum plate, and no defects such as oil stains, scratches and folds on the surface. Aluminum plates with patterns produced in small factories use waste aluminum as material. The surface is dull, the pattern is unclear and uneven, the board surface is uneven, the performance can not meet the standard and the quality is poor.
三看價格。圖案化的鋁板分為純鋁和合金，其價格自然不同。正規廠家生產的花紋鋁板的加工成本為每噸數千元。合金價格高于純鋁。常規制造商的鋁板價格比劣質鋁板高約20％-30％。購買時，企業不應僅比較價格。如果他們購買不合格的產品，后悔已經為時已晚。
Third, look at the price. Patterned aluminum plate is divided into pure aluminum and alloy, and its price is naturally different. The processing cost of patterned aluminum plate produced by regular manufacturers is thousands of yuan per ton. The price of alloy is higher than that of pure aluminum. The price of aluminum plate of conventional manufacturers is about 20% - 30% higher than that of inferior aluminum plate. When purchasing, enterprises should not only compare prices. If they buy substandard products, it's too late to regret.